Home / Kitchens / Wine cabinets
Wine cabinet manufacturer: the built-in column, photographed open.
A wine cabinet is a tall unit with a job: hold the bottles at the right angle, keep the collection where the room looks, and show it the way a collection deserves. This page is the wine line in our Foshan showroom - the glass-front columns, the backlit bottle bays and the wine walls - photographed open, racks set to bottle size, with the spec each column ships under.
The line
Wine storage, built into the wall.
The wall above is the standard four-door glass column over the wood veneer - the racks stocked to the bottle, the glass on soft-close hinges, the light running the inside of the bay so the collection reads lit from the front. It is the unit the kitchen pages keep pointing at, photographed the way it ships: doors open, racks set, the bottle size the grid is cut for. Nothing on this page is a freestanding fridge on a stand - it is the wine storage as it sits in the wall, with the reveal to the carcase made in the factory and checked there.
The column runs on the tall-cabinet standard: 84, 90 and 96 inches high, 24 inches deep on the working width, and 15 to 36 inches wide in the steps the wall allows. The racks are pegs and metal grid, set to the 750 ml standard and cut for magnums and the lie-flat positions on request, and the rating for each bay goes on the spec sheet the way the pull-outs do. The tall line carries the rest of the column family; this page is the wine-dedicated half of it, and the display line carries the glass fronts that hold the decanters.
- Heights84" / 90" / 96" - to ceiling or to the soffit
- Widths15"-36" in the tall-line steps
- Depth24" standard; 12" narrow for glass bays
- RacksPeg and metal grid, set to 750 ml; magnum on request
- GlassFrameless or bronze-framed, soft-close hinges, lit from inside
- Board18 mm E0 plywood, ≤0.05 mg/m³ (GB/T 39600, report SQ2405393) - certificates
- ApplianceCut to the wine-fridge template; the unit is its own line
- Lead10-14 days factory; DDP 18-22 US West, 32-40 US East, 15-20 Sydney
Glass-front columns
The glass fronts, racks set to the bottle.
The two units above are the glass standards: the full-glass door with the decanter wall behind it - the bottle bays set to the 750 and the lie-flat grid for the rest - and the wine wall that doubles as the bar, the metal bottle grid over the backlit stone counter with the glass cabinet beyond. Both are photographed with the collections in them, because a wine cabinet is judged by what it holds, not by the glass in front of it, and the racks are cut to the bottle that is actually in the bay, not to a generic pitch.
The glass is frameless or bronze-framed, on soft-close hinges, and the light runs the inside of the bay rather than the front, so the bottles read lit and the glass reads quiet. The rating for the shelving, the hinge line and the glass are itemised on the spec sheet per column, and the glass crates separately the way the butler pantry's does - the reason a full wall of glass arrives ready to hang, not ready to be careful about. The door and the rack sample ship with the first quote, on the same terms as the rest of the line.


The open wine wall
The wine wall: bar, bottles and the open shelving.
The run above is the open version of the same line: the tall shelving with the rotating basket doing the work the fixed shelf can't, the built-in appliance column at the end, the chandelier over the bar - the wine wall as it reads in the room, with the glassware above the counter and the bottles below it. It is the layout the collection outgrows a single column for: the wall that holds the bottles, the bar that serves them, and the shelving that keeps the rest of the room out of the way.
The bar top is the worktop line - the sintered or stone-look surface cut to the same template as the kitchen, from the countertops page - and the rotating basket is the corner solution the hardware page carries, sized for the wine and glass a fixed shelf would hide. The wall is drawn to the room, not to the bottle count: the count decides the grid, the room decides the wall, and the two agree in the drawing before the box is cut.
Appliances in the column
The appliance bay, cut before the box closed.
The unit above is the column with the two built-ins: the wine cabinet and the second appliance bay, both cut into the carcase before the box was closed, so the units sit flush in the wall the way the showroom column does. The carcase is ours - the 18 mm E0 box, the door line, the reveal - and the appliances are itemised on the spec sheet with their own model references, the same discipline the worktop line runs on the sinks and the faucets. The column reads as one plane even with two different bays in it, because the cut-out is made to the reference, not adjusted to it.
That split is the reason the quote reads as a spec: the column is one line, the appliance is another, and the cut-out is checked against the reference at the factory before the crate is sealed. Your appliance can be the one you already own - send the model and the template is drawn to it - or one we source against the column, priced as its own line either way. The bay arrives braced and ready to be wired, the way the sink bay arrives ready to be plumbed, and the 5-year hardware warranty covers the fittings that hold it in place.
Dimensions
The dimensions the wall is drawn on.
The table is the standard the wine line is drawn from - the heights, the widths and the rack set - and anything outside it is detailed to the collection, the way the kitchen sizes guide does it.
| Unit | Standard | Range |
|---|---|---|
| Column height | 84" | 90", 96" to ceiling or soffit |
| Column width | 3" steps | 15"-36" |
| Depth | 24" | 12" narrow glass bays |
| Rack set | 750 ml standard | Magnum and lie-flat on request |
| Glass | Soft-close, lit inside | Frameless or bronze-framed |
| Appliance bay | To template | Cut before the box closes |
The 750 ml standard is the grid the bays are cut for, and the magnum and the lie-flat positions are the ones the collection usually outgrows it by - send the count and the grid is drawn to it. The depth is the 24-inch working standard the tall line runs on, and the 12-inch narrow bay is for the glass display that wants the bottle close. The height stops at the ceiling or runs full to the soffit, the way the rest of the tall line does, and the top is crowned or built to take the upper run. It is the same table the butler pantry's bottle bays are drawn from - one standard, the kitchen and the wine wall both reading from it.
FAQ
Wine cabinets, in plain answers.
Do you make built-in wine cabinets to our collection size?
Can the wine column be glass-front with lighting?
Do you supply the wine fridge or compressor unit too?
What sizes do the wine columns come in?
Can a wine wall double as a bar?
Can I see the wine columns before I order?
For specifiers
Specifying a wine wall, not a kitchen?
Volume pricing, OEM/ODM programs and a rack-and-glass sample kit - the dealer line answers in your time zone.
The bottles, the grid and the wall - one spec sheet.
Send the count and the wall width. The wine column is drawn to the collection and priced against your drawing - usually within one business day.