Home / Cabinet hardware / Jewellery & watch drawers
Jewellery and watch drawers, open with the collection in them.
A jewellery drawer is judged by what it holds - the chain that has to lie flat, the watch that has to keep winding, the cufflinks that have to stop rolling. This page is the dressing line in our Foshan showroom: the felt tray photographed top-down with the collection in it, the winder running in the drawer, the walk-in configuration with the trouser rack below - open, loaded, in the wood it ships in.
The dressing line
The tray, photographed with the collection in it.
The drawer above is the felt tray top-down, carrying the collection in the layout it is cut for: the earrings and the rings in their squares, the gold watch at the center of the run, the sunglasses, the wallet and the silk bow ties along it, the perfume at the edge. The top view is the way a tray is judged - the layout only reads with the pieces in it, and the felt holds the small items the way the drawer holds the layout, so the photo is the tray in the state a program is decided on.
- RunnersFull-extension, 35-45 kg per pair, soft-close
- TraysFelt-lined organizers, cut to the drawer; watch and cufflink bays
- WinderWatch winder bay, cushioned - itemised as its own line
- RackPull-out trouser rack, hung below the drawer
- Board18 mm E0 plywood, ≤0.05 mg/m³ (GB/T 39600, report SQ2405393) - certificates
- MOQMixed orders from 1,500 sq ft - no minimum at the sample stage
- Lead10-14 days factory; DDP 18-22 US West, 32-40 US East, 15-20 Sydney
- Warranty5-year hardware warranty, aligned with the fitting manufacturer’s
The line runs from that tray into the detail the wall carries: the winder bay keeping the mechanical watch moving, the felt cuts that lie the chain flat, the walk-in configuration with the trouser rack working below the drawer, and the pull-out travel that takes the tray to the hand instead of the hand reaching into the box. Every drawer rides the same full-extension runner standard as the rest of the program, the trays are cut to the drawer width, and each element - the felt, the winder, the rack - is itemised on the spec sheet with its own reference, which is how the line quotes as a set of decisions rather than one price.
The tray, and the winder that runs
Felt where the chain lies, a cushion that keeps the watch moving.
The winder on the left is the bay in its working state: the watch against the cushion, the dial ring glowing, the unit running in the drawer. The winder is built into the drawer as its own line rather than a device on a dresser, which is the difference between a watch that keeps its time in the closet and one that stops at the door - and the bay is photographed running because the point of the unit is the motion, not the wood it sits in. The power for the bay is itemised with the winder on the spec sheet, and the cushion is sized to the watch it holds.
The felt tray on the right is the other half of the dressing drawer: the necklace lying in the cut where a chain should lie, the chronograph beside it, the small pieces in their compartments, the tray lined in felt so the metal reads against the fabric the way it reads in the hand. The felt is the material the tray is judged on - it has to hold the small pieces without lifting them, and it has to read well under the drawer light. Both elements are cut to the drawer width, both are itemised with their own reference, and both ride the same runner standard as the rest of the line.


The walk-in, in the room it ships to
The tray, installed in the run.
The walk-in on the left is the standard dressing configuration in the room it ships to: the drawer open with the watches in their bays and the cufflinks in their squares, the hanging pull-out trouser rack working below it, the warm wood interior and the mirror panels around the run. It is photographed the way a closet program installs it - in the room, at the height the hand works from, with the tray loaded - because the decision on a dressing line is the drawer in the run, not the tray on the bench.
The pull-out travel is the full run on the standard runners, so the tray comes to the hand instead of the hand going into the box, and the soft-close takes the last few centimetres, letting the felt and the chain settle without the knock. When the line goes on a spec sheet, it carries the elements separately: the drawer and its runner rating, the felt tray and its cuts, the winder bay and its power, the rack and its drop. The wall shows them working together; the spec sheet shows them priced apart.
The moment of use, and the standard under it
The hand in, the tray at the height it works.
The photo on the left is the drawer in the moment of use: the hand coming in with the piece, the tray out at the height the hand works from, the watches and the bracelets in their bays behind it. That is the test state for the dressing line - not the drawer empty under the studio light, but the drawer mid-cycle, carrying the collection, at the reach the room gives it. The winder runs behind the tray, the felt holds the small pieces, and the unit is photographed at exactly the moment it is judged.
The family on this page is small, and each element has a job: the felt tray holds the chain flat and the small pieces in place; the watch bays take the chronograph and the daily watch; the winder bay keeps the mechanical watch moving; the pull-out trouser rack runs below the drawer at the hang height. Under the elements is the standard the rest of the program runs on - the full-extension runners at 35 to 45 kg per pair, the soft-close on every drawer, the box built to the same board the kitchen and the wardrobe lines use - and each element is itemised on the spec sheet with its reference and its rating. The 5-year hardware warranty covers the runners, the tray hardware and the rack as the lines they are, and the closet pages show the same line installed in the rooms it ships to.
FAQ
Jewellery and watch drawers, in plain answers.
Are the jewellery drawer trays felt or leather?
What widths do the jewellery drawers come in?
Do you build the watch winder into the drawer?
Is the winder battery or wired?
What happens if the tray or the winder bay wears?
Can I see the dressing line before I order?
For specifiers
Specifying a dressing program, not a closet?
Volume pricing, OEM/ODM tray sets and a hardware sample kit - the dealer line answers in your time zone.
Every tray and winder, itemised per drawer.
Send the drawer widths and the layout - the dressing line is written into the quote per element, with the runner rating it ships under.