Home / Cabinet hardware / Handles & locks
Handles, pulls and the smart lock row, on the wall.
A handle is the only part of a cabinet a family touches every day, so the finish has to survive the wrist as well as the render. This page is the hardware wall's finish run in our Foshan showroom - the knob panels, the wooden handle rows, the bar-pull grids and the smart lock demo stand - photographed mounted, with the finish beside the door it will sit on.
The wall
Handles, pulls, knobs and the smart lock row, on the wall.
The wall behind this page is the finish run of the hardware line, not a product table: lever handles mounted on their test boards, knob panels in the metals, the wooden grip rows, and the smart lock on its demo stand at the end of the run. Every piece is photographed in the state it ships in - mounted, screwed to its escutcheon, on the door or the stand it was tested on - because a handle that reads well flat on a card can read wrong once the reveal and the door finish are around it.
- RangeKnobs, bar pulls, cup pulls and the smart lock row - mounted on the wall
- MetalsBrushed nickel, matte black, brass, antique bronze, brushed gold
- GripsSolid timber in oak and walnut tones; knurled and fluted metal
- Smart lockFingerprint, PIN, card and mechanical key - demo stand
- Board18 mm E0 plywood, ≤0.05 mg/m³ (GB/T 39600, report SQ2405393) - certificates
- MOQMixed orders from 1,500 sq ft - no minimum at the sample stage
- Lead10-14 days factory; DDP 18-22 US West, 32-40 US East, 15-20 Sydney
- Warranty5-year hardware warranty, aligned with the fitting manufacturer’s
That is the point of a mounted wall. The knob panel shows the round and the square mounts in brushed nickel, matte black and brass; the wooden rows carry the solid timber grips in oak and walnut tones; the demo stand holds the bronze smart lock with the panel out, so each unlock method can be tried in person. Everything on the wall rides the same mounting standard the push-open and the hinges use, so a fitting goes on the spec sheet as an itemised line, not an extra, and the 5-year hardware warranty covers the finish as well as the escutcheon.
Finish panels
The board where the weight is felt, the panel where the metal is chosen.
The board on the left is the mounting side of the range: the light oak shelves, the brushed aluminium rails, the hooks and the bracket samples in their rows on the dark ground - the surface a designer feels the weight of a fitting on before it goes on a spec sheet. A handle that is light in the hand reads cheap at full reach, and the board exists to catch that before the first door is cut. The knob family runs on the panel at the right: the round and square mounts in brushed nickel, matte black and brass, the escutcheon behind each one, so the choice is the metal, the profile and the mounting plate together, not a knob alone.
The two presentations are photographed the same week in the showroom, which is how a finish sample keeps its honesty: the metal in the photo is the metal on the wall, at the same light, on the same day. The knob panel reads the range on its white ground the way the range reads against a painted front, and the wooden handle rows sit on their black panel next door, with the bar pulls running their own grid below. The wall is the full finish run, not a highlight reel, and the spec list at the top of the page is the standard it ships on.


Wooden grips
Timber handles, matched to the door they will sit on.
The black panel on the left is the wooden row of the range: solid timber grips in oak and walnut tones, knobs and levers in the same woods, mounted in a grid so the grain can be read next to itself and against the dark ground. The reason the row exists is that a wooden handle reads differently on a painted front than on an oak-veneer one, and the panel puts the two decisions in the same frame: the grain of the grip and the grain of the door it will sit on, checked before the door is cut.
Each wooden fitting is finished to the door standard rather than to a hardware standard - the same oil or lacquer class the fronts run - so the grip ages with the door instead of against it, and the mount is the same escutcheon pattern as the metals. The grid is photographed at the same light as the rest of the wall, and the sample ships with the first quote on the same terms: a door sample of the finish, a fitting of the choice, both from the same wall, so the decision is made on the material it ships in.
The smart lock row
A lock that demonstrates, not a spec that promises.
The stand at the top of the page is the smart lock in its demo state: a wood-grain door section with the bronze panel facing out, the ornate lever on its escutcheon, the fingerprint pad below the handle, and the function list beside it - the PIN keypad, the card reader, the video intercom, the mechanical key, the visitor log and the temporary and virtual PINs. Every method on the list can be tried on the stand, because a lock is judged by the wrist and the key, not by the panel render, and the mechanical key stays the backup that needs no power at all.
The smart lock runs as its own line on the spec sheet rather than inside the cabinet hardware standard: it belongs to the door programs and the rooming packages, not to the base cabinet fronts, and it carries the same 5-year hardware warranty as the fittings on the wall. The grid on the left is the front wall that shows the doors the handles will sit on - the grain, the edge and the reveal in the same frame - which is why the handle wall and the door wall are photographed side by side in the showroom, and why the quote carries the lock, the escutcheon and the door sample as separate items, each with its own reference.
FAQ
Handles and locks, in plain answers.
Are handles and pulls included in the base price?
What finishes do the lever handles come in?
Does the smart lock work without power?
What is the door load rating the handles work under?
What happens if a handle or escutcheon wears after installation?
Can I see the handle wall before I spec it?
For specifiers
Specifying a handle program, not a kitchen?
Volume pricing, OEM/ODM finish runs and a hardware sample kit - the dealer line answers in your time zone.
Every handle, itemised on the spec sheet.
Send the finish list and the door count - the fittings are written into the quote per door, with the warranty they ship under.