Home / Case library / Dark grey kitchens
Dark grey, matte: the finish family that hides a small room.
Dark grey is the finish that makes a compact run read as one mass instead of a cupboard wall - provided the fronts are matte, the light is layered and the handle is a bar, not a knob. This page sets out the family as we build it, with reference photography.
The family
Dark grey, matte, and lit from three places.
Dark grey works when the surface stops reflecting. A matte front absorbs the room's light instead of mirroring it, which is what lets a two-metre run read as one calm block rather than a set of doors; the moment the same colour goes gloss, every cabinet starts to show the window, the ceiling and whoever is standing in the room. That is why the family is specified in matte - fenix-type laminates, matte lacquer or veneer - and why the samples are judged at full size under the client's own light.
- FrontsMatte laminate, matte lacquer or veneer; gloss on request only
- GlassSmoked or grey-tinted, aluminium frame in black or bronze
- HandlesBlack bar, integrated finger pull, or push-open on the tall units
- LightingUnder-cabinet strip, in-cabinet LED, one pendant over the island
- Board18 mm E0 plywood, ≤0.05 mg/m³ (GB/T 39600, report SQ2405393) - certificates
- MOQMixed orders from 1,500 sq ft - no minimum at the sample stage
- Lead10-14 days factory; DDP 18-22 US West, 32-40 US East, 15-20 Sydney
- Warranty5-year hardware warranty, aligned with the fitting manufacturer’s
The rest is lighting and hardware. Three layers do the work: the under-cabinet strip that washes the splashback, the in-cabinet LED that turns a glass unit from a dark hole into a display, and one warm pendant over the island. The handle is a black bar or an integrated finger pull, because a knob in this colour reads as a dot. The photographs on this page are reference imagery of the finish family; Adam Cabinet installations are photographed on request.
The room
Three rooms, one finish, three different jobs.
The first frame is the open version of the family: grey fronts under a stainless hood, a stone island facing a window, and enough daylight that the matte surface reads grey rather than black. The second does the opposite - it puts the dark island against a warm terracotta tall bank, which is the trick for a room that would otherwise go flat: one warm mass, one dark mass, and the join between them doing the work.
The third is the pure elevation: upper cabinets, a lit shelf line, a black stone top and the base run, all in the same grey. This is the composition a buyer should judge the finish by, because there is nothing else in the frame to flatter it. If the doors still read as separate panels here, they will read as separate panels in the client's kitchen - which is the test the samples exist for.



The details
What separates a matte run from a painted one.
The details are where a dark kitchen earns its price. The tall bank carries the ovens flush in the same grey, so the appliances disappear into the wall instead of interrupting it; the drawers are handleless with the finger pull cut into the top edge, which keeps the front uninterrupted; and the splashback is stone rather than tile, because a grout line is a horizontal that competes with the door reveals.
The specification underneath is the standard the whole range runs: 18 mm E0 board, soft-close hardware at 50,000 hinge cycles, the 5-year warranty on the fittings and the same rate card as every other finish. A dark grey kitchen is not a premium line in this programme - it is a front finish on the same carcass, which is why it can be quoted alongside the oak and the white on one drawing.



FAQ
The finish family, in plain answers.
Why matte rather than gloss for a dark grey kitchen?
Does a dark kitchen make a small room feel smaller?
What worktop suits dark grey fronts?
How are the handles specified?
Can this finish be combined with wood in the same kitchen?
What is the lead time and shipping for this finish?
For specifiers
Specifying a dark kitchen for a client?
Volume pricing, OEM/ODM fronts and a full finish sample set - the dealer line answers in your time zone.
A finish is a sample before it is a price.
Send the room photograph, the light direction and the finish you are weighing. The sample set ships, and the kitchen is quoted on the same rate card as every other colour.